TRI-ROOF: Efficient photovoltaic in-roof system for ideal roof integration

The in-roof mounting system TRI-ROOF+ offers the highest aesthetics for PV-systems on the roof. TRI-ROOF+ replaces parts or entire roof coverings and convinces with its clever water drainage system.

TRI-ROOF+ 4

TRI-ROOF: In-roof photovoltaic installation for maximum aesthetics and efficiency

The TRI-ROOF in-roof PV is the perfect installation solution for anyone who values aesthetically pleasing PV without visible support systems. With this innovative solution, parts of the roof or the entire roof covering can be replaced. This creates a visually appealing and at the same time secure integration of the PV into the roof structure.

Thanks to smart planning software and patented SafeClick mounting, the PV for in-roofs is extremely safe and easy to install on the roof. The PV are simply inserted into the insertion profiles and are securely positioned thanks to their own weight. There is no need for any additional fastening of the modules. An outstanding feature is the clever drainage system, which ensures that water is drained away safely. The in-roof system also offers flexible application possibilities thanks to the option of upright or transverse mounting of the modules. This opens up a wide range of design options for creating individual roof designs.

TRI-ROOF fulfills the "hard roofing" conditions by passing the fire protection test - this confirms its technical excellence and suitability for long-term construction projects.

Our PV are manufactured in Central Europe to the highest quality standards, all components of the TRI-ROOF mounting system are statically tested and optimized for wind and snow loads in order to remain reliable even in extreme weather conditions. All profiles and accessories manufactured under the original TRI-ROOF label are covered by a manufacturer's guarantee of 15 years from the date of delivery. This guarantee covers both the perfect condition and the technical efficiency of the products.

You already have a current project? You can sendus your project enquiryhere.

TRI-ROOF+ 5
TRI-ROOF+ 6
TRI-ROOF+ 7

The advantages of TRI-ROOF+

  • Replaces parts of the roof or the entire roof covering

  • Closed module surface for highest aesthetics

  • Special profiles for maximum water impermeability

  • No thermal separation necessary thanks to floating bearing

  • Optimal load distribution and stability

  • Suitable for all common framed solar modules

  • Simple replacement of the solar modules

  • Certified: TRI-ROOF carries the general building authority test certificate abP and the official "hard roofing" test certificate from the North Rhine-Westphalia Materials Testing Office in combination with AIKO Neostar 2S+ double-glazed modules

  • Certified for wind and snow loads, statically tested

Photovoltaic mounting for in-roof

The in-roof mounting system TRI-ROOF+ enables the installation of in-roofPV systems using all modular types from various manufacturers. The needs of customers who attach great importance to an aesthetically mounted solar system are thus optimally met.

TRI-ROOF+ 8

1. attach substructure

The roof integration system TRI-ROOF+ is mounted directly on the roof battens. Rainwater is safely drained away via the innovative water drainage system.

TRI-ROOF+ 9

2. mount SafeClicks

The SafeClick elements are screwed onto the IP in-roof profile at the specified distance. The insert profile is then clicked into the SafeClick.

TRI-ROOF+ 10

3. click in the insertion profiles

The insertion profiles are thus connected to the roof in a floating manner. Damage to the roof and module caused by thermal expansion is thus avoided.

TRI-ROOF+ 11

4. insert modules

The modules are inserted into the profiles in a time-saving manner; additional fastening of the modules is completely unnecessary.

Installation video TRI-ROOF+ for roof-integrated PV systems

Get an impression of how to install the PV insert system TRI-ROOF+.

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Mounting system components for an in-roofPV installation

The in-roof mounting system TRI-ROOF + is the perfect basis for a safe, solid and watertight installation of PV systems directly in the roof. The innovative water drainage system ensures a safe drainage of rainwater and the homogeneous surface impresses with its unbeatable appearance, especially when using black components. The insertion system offers the advantage that the PV modules are easily inserted into the insertion profiles and are securely placed due to their own weight. Additional fastening of the modules is no longer necessary.

  • TRI-ROOF+ horizontal profile TR-H

    Horizontal profile for water absorption under the module joint, which drains the water into the vertical IP profile.

  • TRI-ROOF+ in-roof profile IP

    Vertical mounting profile that collects the water under the module joint and from the TR-H profile and drains it underneath the system onto the tiles or directly into the gutter.

  • TRI-STAND SafeClick-Torx:

    The innovative SafeClick system allows the TRI-STAND insert profiles to be fixed to the universal profiles effortlessly and quickly. The SafeClick elements are screwed onto the universal profiles at the specified distance, onto which the insert profiles are clicked without further screwing.

  • TRI-STAND Inlay profile:

    Our insertion profiles are available in different sizes and heights to ensure sufficient ventilation of the PV modules. The solar modules can be easily inserted without clamps or further screws and are thus floating, which prevents damage due to thermal expansion.

  • TRI-STAND Profile connector:

    In order to connect the insert profiles effortlessly and securely with each other, we offer appropriate accessories with the TRI-STAND TS-C insert profile connector. Slide the connectors onto the insert profiles and then secure them with grub screws.

  • TRI-STAND Edge Clip cable fixation:

    Good cable management ensures long-lasting and safe operation of the photovoltaic system - with our Edge Clips, we supply the appropriate accessories for exemplary cable management.

TRI-ROOF+ and TRI-STAND products for photovoltaic mounting on an in-roof

System components: Standard

TRI-ROOF+ 12

TRI-STAND Insertion profile, blank

  • Variants: TS-30/32/35/38/40
  • Available in different lengths
TRI-ROOF+ 13

TRI-STAND Insert profile, black

  • Variants: TS-30/32/35/38/40
  • Available in different lengths
TRI-ROOF+ 14

TRI-ROOF+ In-roof profile IP 3.80 m

  • Item No.: 1503174
TRI-ROOF+ 15

TRI-ROOF+ Horizontal profile TR-H 3.50 m

  • Item no.: 1503187
TRI-ROOF+ 16

TRI-STAND SafeClick Torx, blank

  • Item No.: 1502870
TRI-ROOF+ 17

TRI-STAND SafeClick-Torx, black

  • Item No.: 1502963
TRI-ROOF+ 18

TRI-STAND Insert profile connector TS-C, blank

  • Item No.: 1502216
TRI-ROOF+ 19

TRI-STAND TS-C insert profile connector, black

  • Item No.: 1502417
TRI-ROOF+ 20

TRI-STAND End bracket TS-E, blank

  • Item No.: 1502214
TRI-ROOF+ 21

TRI-STAND End bracket TS-E, black

  • Item No.: 1502307
TRI-ROOF+ 22

TRI-ROOF+ IP profile connector IP-C

  • Item No.: 1502929
TRI-ROOF+ 23

TRI-ROOF+ end plate below AU

  • Item No.: 1502931
TRI-ROOF+ 24

TRI-ROOF+ mounting clip TR-C

  • Item No.: 1502544
TRI-ROOF+ 25

TRI-ROOF+ in-roof profile holder IP-U

  • Item No.: 1502930
TRI-ROOF+ 26

TRI-ROOF+ End support TR-E+

  • Item No.: 1503031
TRI-ROOF+ 27

TRI-ROOF+ centre support TR-M

  • Item No.: 1502667
TRI-ROOF+ 28

TRI-ROOF+ spacer TR-D

  • Item No.: 1502668
TRI-ROOF+ 29

TRI-ROOF+ flat connector

  • Item No.: 1502308
TRI-ROOF+ 30

TRI-ROOF+ drip tray TR-H

  • Item No.: 1502965
TRI-ROOF+ 31

TRI-STAND Sliding nut M10

  • Item No.: 1502219
TRI-ROOF+ 32

TRI-STAND MS EPDM module fuse

  • Item No.: 1502990

System components: Optional

TRI-ROOF+ 33

TRI-STAND End profile, blank

  • Variants: TS-30/32/35/40
  • Available in different lengths
TRI-ROOF+ 34

TRI-STAND End profile, black

  • Variants: TS-30/32/35/40
  • Available in different lengths

System components: Accessories

TRI-ROOF+ 35

TRI-STAND Bending tool+

  • Item No.: 1502935
TRI-ROOF+ 36

TRI-ROOF+ hexagon head screw M10x25 A2

  • Item No.: 1502256
TRI-ROOF+ 37

TRI-STAND Pan head screw

  • 8.0 x 80 TX40, Article No.: 1502281
  • 8.0 x 120 TX40, article no.: 1502282
TRI-ROOF+ 38

TRI-STAND Hammerhead bolt M10x30 A2, with locking nut

  • Screw, article no.: 1502255
  • Nut, Item No.: 1502254
TRI-ROOF+ 39

TRI-STAND Thin sheet metal screw

  • Item No.: 1502934
TRI-ROOF+ 40

TRI-ROOF+ round head screw

  • Item No.: 1502547
TRI-ROOF+ 41

TRI-STAND Lock nut M10 A2

  • Item No.: 1502254
TRI-ROOF+ 42

TRI-STAND Washer

  • Item no.: 1503397
TRI-ROOF+ 43

TRI-STAND Edge Clip Cable Fixation

  • Item No.: 1502246

FAQs about the TRI-ROOF+ mounting system

An underlay is always recommended, as condensation may form under the module and drip into the roof via installation boxes.
The underlay membrane must be installed in such a way that any water that occurs is drained away unhindered under the module field.
The TR-D spacers are horizontal module shift locks. For TRI-ROOF+ systems, these are screwed in on the left and right before the last module of a row and pushed down to the lower SafeClick. For horizontal assembly, the TR-D spacer must be inserted after every third module, for vertical assembly after every fourth module.
TRI-ROOF+ always requires a horizontal substructure, such as wooden battens, wooden purlins or steel purlins.
The TRI-ROOF+ special adhesive for ridge sheets is applied to the lower UP-I profile as an 8 mm thick line across the entire rail width. The rail piece to be joined is pressed into the adhesive and screwed from above with a flat connector, 2 sliding nuts M10 and 2 hexagon nuts M10 x 25 A2. If this is not possible because there is a SafeClick at the joint, the flat connector can also be connected laterally or at the bottom in the grooves using M10 x 20 A2 hammerhead screws and M10 A2 self-locking nuts. For system depths greater than 12m, the flush-mounted I-connection is pushed together to 5mm, the 8mm adhesive cord is applied and the flat connector is only attached to the lower flush-mounted I-rail in order to minimise the stresses caused by temperature changes. If there is a SafeClick on the UP-I profile for this type of connection, the flat connector is fastened to the underside of the upper UP-I profile.

References

The following are references for photovoltaic installation with TRI-ROOF+.

Downloads

All information about the TRI-ROOF+ mounting system for download as PDF.

  • TRI-ROOF+ In-roof mounting system - data sheet

    → download PDF English | German

  • TRI-ROOF+ In-roof mounting system - installation instructions

    → download PDF English | German

  • TRI-ROOF test certificate for hard roofing (P-MPA-E-25-500)

    → download PDF English | German

  • TRI-STAND earthing systems

    → download PDF English | German

  • TRI-STAND Insert profiles

    → download PDF English | German

  • Application customer number

    → download PDF English | German