We utilize exclusively components of high-quality aluminium and V2A stainless steel so that our photovoltaic mounting systems will meet highest quality standards. In our detailed data sheets for every mounting system, you will find more information about the components to be used for the appropriate sub-structures. We have independent third parties confirm the quality of our products by means of extensive tests with brand modules. We thus provide you with a warranty of reliable products for long lasting PV systems.
TRITEC guarantees top quality. With our photovoltaic mounting systems, we set great store by the high-quality processing of components and by the stability of the substructure as well. We have independent third parties confirm the quality of our products by means of extensive tests with brand modules. We thus provide you with a warranty of reliable products for long lasting PV systems.
By means of the TÜV test, the mounting systems are certified within the scope of a mechanical stress test according to the international standard IEC 61215.
The test is performed in the following stages: First, a flash test determines the nominal output of the module, and the material characteristics are examined by means of an electroluminescence camera. For the stress test, a module is fastened to the mounting system in accordance with the Instructions. Then, the module is loaded with 2400 Pa, which is equivalent to 245 kg/m2. Wind pressure or wind suction are thus simulated. In another test run, the pressure is increased to 5400 Pa (550 kg/m2), which is equivalent to the burden due to snow pressure. After the individual stress tests, the module is re-inspected each time – the TÜV test is only considered passed if, after the burdens, no damages to the module are detected and its performance is not impaired. TRI-STAND and TRI-ROOF have been awarded certification by TÜV Rhineland.
It’s a matter of course for us that PV mounting systems must withstand the most adverse weather conditions over a number of years. We therefore grant you a 10-year guarantee for all components of the TRITEC mounting systems. If you participate in one of our numerous product trainings, the guarantee will be extended to a total of 15 years.