Modules put to the endurance test: Ammonia and salt spray tests

Modules put to the endurance test: Ammonia and salt spray tests 1

On roofs of farms, the modules can be exposed to high ammonia load, especially if they are near vents or integrated into the roof itself. If, in combination with high humidity, condensation forms, the ammonia can become problematic.

Solar modules on farm roofs: ammonia tests

TÜV Rheinland and DLG test the resilience of the modules when exposed to an environment containing ammonia through standardised testing procedures. In order to pass the test, it is crucial that the performance does not excessively decrease, no visible defects occur and that the insulation remains intact even when wet.

Solar modules in coastal areas: Salt spray tests

In coastal areas, the PV modules are excessively exposed to salty air. The salt spray tests according to IEC 61701 expose the modules at a 15-30° angle and 35°C air temperature over a period of 96 hours to spray containing salt in a laboratory environment. Using the following controls (insulation exposed to wet conditions, visual inspection, etc.), corrosion around holes, screw connections and electrical connections are detected.

About Author

TRITEC has been specializing in solar power generation through photovoltaics for over 34 years. We are active worldwide in PV wholesale as well as in large-scale plant construction. In addition to our proven PV mounting systems, we also offer our own intelligent system solutions for the planning, design and performance control of photovoltaic systems, as well as branded products from leading photovoltaic manufacturers.

Related Content