Solar Mounting Systems by TRITEC

TRITEC mounting systems bundle up more than 30 years of photovoltaic experience and know-how. Due to the realization of numerous solar systems worldwide, well thought-out solutions were conceived which offer ideal mounting solutions for any type of roof.

PV mounting systems by TRITEC enable easy and simple mounting of photovoltaic systems as on-roof and facade systems as well as roof-integrated solar systems. TRI-STAND, TRI-ROOF+ and TRITEC PMT EVO 2.0 South and East-West are versatile, easy-to-install mounting systems for numerous applications. They provide solutions for virtually any type of roof – both for standard installations and special applications.

TILED ROOF

Tri Stand Tiles Roof

TRAPEZOIDAL SHEET METAL

Tri Stand Trapezoidal Roof

STANDING SEAM METAL

Tri Stand Standing Seam Roof

CORRUGATED FIBRE CEMENT

Tri Stand Corrugated Roof

IN-ROOF

Tritec

FLAT ROOF EAST-WEST

Tritec

FLAT ROOF SOUTH

Tritec

Photovoltaic Mounting Systems Components

We utilize exclusively components of high-quality aluminium and V2A stainless steel so that our photovoltaic mounting systems will meet highest quality standards. In our detailed data sheets for every mounting system, you will find more information about the components to be used for the appropriate sub-structures. We have independent third parties confirm the quality of our products by means of extensive tests with brand modules. We thus provide you with a warranty of reliable products for long lasting PV systems.

TRITEC Quality

TRITEC guarantees top quality. With our photovoltaic mounting systems, we set great store by the high-quality processing of components and by the stability of the substructure as well. We have independent third parties confirm the quality of our products by means of extensive tests with brand modules. We thus provide you with a warranty of reliable products for long lasting PV systems.

Mechanical stress test by TÜV

By means of the TÜV test, the mounting systems are certified within the scope of a mechanical stress test according to the international standard IEC 61215.
The test is performed in the following stages: First, a flash test determines the nominal output of the module, and the material characteristics are examined by means of an electroluminescence camera. For the stress test, a module is fastened to the mounting system in accordance with the Instructions. Then, the module is loaded with 2400 Pa, which is equivalent to 245 kg/m2. Wind pressure or wind suction are thus simulated. In another test run, the pressure is increased to 5400 Pa (550 kg/m2), which is equivalent to the burden due to snow pressure. After the individual stress tests, the module is re-inspected each time – the TÜV test is only considered passed if, after the burdens, no damages to the module are detected and its performance is not impaired. TRI-STAND and TRI-ROOF have been awarded certification by TÜV Rhineland.

Guarantee

It’s a matter of course for us that PV mounting systems must withstand the most adverse weather conditions over a number of years. We therefore grant you a 10-year guarantee for all components of the TRITEC mounting systems. If you participate in one of our numerous product trainings, the guarantee will be extended to a total of 15 years.