Sistemas de montaje
Los sistemas de montaje fotovoltaico de TRITEC permiten un fácil montaje de las instalaciones fotovoltaicas como sistemas sobre el tejado y fachadas, así como instalaciones solares integradas en el tejado.
Los ensayos extensos sobre los componentes y perfiles del sistema demuestran una excelente estabilidad de los sistemas de montaje de TRITEC bajo cargas de nieve y viento máximas.
TRITEC installation systems, bundle in the meantime 25 years of photovoltaic experience. Our products TRI-STAND, Sistema de montaje TRI-STAND Aero TRI-STAND Aero, TRI-VENT and TRI-ROOF offer the ideal installation solution for every type of roof. In this context, we place value in high quality processing of the components, as well as the stability of the substructure. In the end, PV systems must withstand the most adverse weather conditions for years.
We confirm the quality of our products by means of detailed independent tests with brand name modules. Thus, we guarantee you reliable products for long-lived PV systems.
The installation system is certified in the scope of the TÜV test according to the international norm IEC 61215 and is subjected to mechanical load tests.
The test is executed in the following stages: First, a flash test for the nominal performance of the module is determined and by means of an electroluminescence camera, the material characteristics are tested.
For the load test, the module is installed on the installation system according to instructions. Finally, the module is loaded with 2400 Pa, which corresponds to 245 kg/m2. Thereby, the wind pressure or wind suction is simulated.
In a second run, the pressure is increased to 5400 Pa (550 kg/m2), which corresponds to the pressure of snow.
After the load tests, the module is inspected again. The TÜV test is only passed if there are no damages to the module and the performance is not impaired.
Since TRI-STAND Aero is installed with no penetration on a flat roof, the system is also tested in a wind channel. Using miniature models, tests are performed to assess how the installation system behaves during extreme wind loads and with the defined ballasts of the manufacturer. The renowned engineering office, Wacker Engineers, which has long-year and international experience with wind channel tests, executed the tests.
All TRITEC installation systems are certified by the TÜV Rhineland.
On the product pages, you will find test reports and the certificates for TRI-STAND, TRI-VENT and TRI-ROOF . In addition to the TÜV certificate for Sistema de montaje TRI-STAND Aero TRI-STAND Aero, you can also refer to the results of the wind channel test.
Nuestras marcas de los fabricantes de sistemas fotovoltaicos de montaje
Resumen de los sistemas de montaje fotovoltaico
Sistemas de montaje sobre tejado
-
- Sistema de montaje TRI-STAND
- adecuado para sistemas aislados pequeños hasta grandes instalaciones de interconexión de red, sobre tejados inclinados y planos como también en fachadas
-
- Sistema de montaje TRI-STAND Aero
- Sistema de montaje optimizado aerodinámicamente para grandes tejados planos con poca capacidad de carga.
Sistemas de montaje para chapa trapezoidal
-
- Sistema de montaje TRI-VENT
- Montaje extremadamente sencillo e instalaciones solares sobre techos de chapa trapezoidal con una mínima utilización de herramientas
Sistemas de integración en el tejado
-
- TRI-ROOF Sistemas de integración
- sistema de inserción integrado en el tejado para todos los tipos de paneles de todos los fabricantes del surtido fotovoltaico de TRITEC
-
- Solrif
- Sistema de integración en el tejadoapropiado para numerosas variantes de tejados inclinados




