Mounting systems
PV mounting systems from TRITEC permit the easy installation of photovoltaic systems as on-roof and building-exterior systems as well as roof-integrated solar systems.
Extensive component and profile tests provide evidence of the excellent stability of all TRITEC mounting systems even under maximum snow and wind loads.
TRITEC installation systems, bundle in the meantime 25 years of photovoltaic experience. Our products TRI-STAND, TRI-STAND Aero, TRI-VENT and TRI-ROOF offer the ideal installation solution for every type of roof. In this context, we place value in high quality processing of the components, as well as the stability of the substructure. In the end, PV systems must withstand the most adverse weather conditions for years.
We confirm the quality of our products by means of detailed independent tests with brand name modules. Thus, we guarantee you reliable products for long-lived PV systems.
The installation system is certified in the scope of the TÜV test according to the international norm IEC 61215 and is subjected to mechanical load tests.
The test is executed in the following stages: First, a flash test for the nominal performance of the module is determined and by means of an electroluminescence camera, the material characteristics are tested.
For the load test, the module is installed on the installation system according to instructions. Finally, the module is loaded with 2400 Pa, which corresponds to 245 kg/m2. Thereby, the wind pressure or wind suction is simulated.
In a second run, the pressure is increased to 5400 Pa (550 kg/m2), which corresponds to the pressure of snow.
After the load tests, the module is inspected again. The TÜV test is only passed if there are no damages to the module and the performance is not impaired.
Since TRI-STAND Aero is installed with no penetration on a flat roof, the system is also tested in a wind channel. Using miniature models, tests are performed to assess how the installation system behaves during extreme wind loads and with the defined ballasts of the manufacturer. The renowned engineering office, Wacker Engineers, which has long-year and international experience with wind channel tests, executed the tests.
All TRITEC installation systems are certified by the TÜV Rhineland.
On the product pages, you will find test reports and the certificates for TRI-STAND, TRI-VENT and TRI-ROOF . In addition to the TÜV certificate for TRI-STAND Aero, you can also refer to the results of the wind channel test.
Our manufacturers brands for PV Mounting systems
An overview of PV installation systems
Mounting systems on the roof
-
- TRI-STAND PV Mounting systems
- Suitable from the small stand-alone system to the large grid-connected system, on pitched roofs and flat roofs as well as on building exteriors
-
- TRI-STAND Aero PV Mounting systems
- Aerodynamically optimized installation system for large flat roofs with low load capacity.
Mounting systems for trapezoidal sheet roofs
-
- TRI-VENT Montagesystem
- Extremely easy installation of solar systems on on trapezoidal sheet roofs with a minimum number of tools
Roof integrated mounting systems
-
- TRI-ROOF Roof integrated mounting system
- Roof-integrated insertion system for all module types of all manufacturers of the TRITEC PV product range
-
- Solrif
- Roof integrated system suited to numerous types of sloping roofs






