deutsch | english (UK) | english (global) | franšais | italiano | espa˝ol

Contact

How to contact us:

Give us a callCH  +41 32 665 35 35
Give us a callUK  +41 61 264 00 23

Contact form

TRITEC International

TRITEC UK

All Locations

Download

TRI-FLAT (pdf, 194 kB)

Images

TRI-FLAT East-West and TRI-FLAT South for flat roofs
With an east-west roof, up to double the area for power generation will be available. The PV system ensures high yields especially during the peak-consumption hours of households, i.e. mornings and evenings.
TRI-FLAT East-West and TRI-FLAT South for flat roofs
Normally, PV systems oriented towards the south provide the best output (kWh/kWp). The flatter the covering of flat roofs, the lower the amount of shading and the more modules can be used.

Information

The German version is binding. The content is subject to change without prior notice.

TRI-FLAT East-West and TRI-FLAT South for flat roofs

Low transport and storage costs
With these two TRI-FLAT mounting systems, TRITEC offers the ideal solution for PV systems at a south or east-west orientation and with 10░ or 15░ supports. Both systems are based on only a few components which are all stackable and fit on Euro pallets – ideal for economical and efficient transportation to the construction site.
No-tool module installation
Swift and uncomplicated installation is a special feature of TRI-FLAT East-West and TRI-FLAT South. The bottom rails are telescopically pushed into each other and fixed in place by a special bending tool so that they can be adjusted to the respective module size. The installation does not require any roof penetration. Both mounting systems are suitable for all framed modules in transverse installation. These are clamped on their long side by a simple click system.
Aerodynamically optimized
TRI-FLAT East-West and TRI-FLAT South were tested in the wind tunnel. Accordingly, these systems can be used on flat roofs even if such roofs can accept only minor loads. Any ballasting which is generally necessary only in the area of edges will be attached underneath the module and is accordingly not visible.
Applications at a glance
  • TRI-FLAT East-West for PV systems with east-west orientation
  • TRI-FLAT South for PV systems with a southern orientation
  • Both systems are suitable for flat roofs of up to 5░ inclination
  • Suitable for flat roofs, such as membrane roofs, gravel, concrete and substrate roofs as well as for green roofs
Art. No. 1502827 1502828 1502829
Model TRI-FLAT bottom profile, L = 1145 mm TRI-FLAT clip for ballasting TRI-FLAT clip, bottom
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 1 pc. 100 pc. 200 pc.
Dimensions (L / W / H) 1145 mm / 100 mm / 36 mm 20 mm / 150 mm / 37 mm 25 mm / 46 mm / 35 mm
Weight 0.804 kg 0.022 kg 0.015 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502830 1502831 1502832
Model TRI-FLAT holder, top, 10░ TRI-FLAT holder, bottom, 10░ TRI-FLAT holder, top, 15░
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 100 pc. 100 pc. 100 pc.
Dimensions (L / W / H) 40 mm / 78 mm / 64 mm 41 mm / 88 mm / 42 mm 40 mm / 78 mm / 64 mm
Weight 0.092 kg 0.066 kg 0.092 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502833 1502834 1502835
Model TRI-FLAT holder, bottom, 15░ TRI-FLAT carrier module, L = 500 mm TRI-FLAT bracket, 10░, L = 142 mm
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 100 pc. 100 pc. 25 pc.
Dimensions (L / W / H) 41 mm / 88 mm / 42 mm 500 mm / 63 mm / 43 mm 142 mm / 47 mm / 192 mm
Weight 0.066 kg 0.257 kg 0.428 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502836 1502837 1502838
Model TRI-FLAT bracket, 10░, L = 79 mm TRI-FLAT intermediate bracket, 15░, L = 100 mm TRI-FLAT series connector, L = 380 mm
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 50 pc. 100 pc. 200 pc.
Dimensions (L / W / H) 79 mm / 44 mm / 185 mm 100 mm / 45 mm / 110 mm 380 mm / 36 mm / 32 mm
Weight 0.221 kg 0.159 kg 0.188 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502839 1502840 1502841
Model TRI-FLAT series connector, L = 680 mm TRI-FLAT series connector, L = 980 mm TRI-FLAT set rear wall panel 10░, incl. fastening
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 1 pc. 1 pc. 10 pc.
Dimensions (L / W / H) 680 mm / 36 mm / 32 mm 980 mm / 36 mm / 32 mm 920 mm / 45 mm / 215 mm
Weight 0.336 kg 0.484 kg 0.800 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502842 1502843 1502844
Model TRI-FLAT set rear wall panel 15░, incl. fastening TRI-FLAT clamp XX = 35 mm TRI-FLAT clamp XX = 38 mm
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 10 pc. 200 pc. 200 pc.
Dimensions (L / W / H) 920 mm / 45 mm / 295 mm 32 mm / 44 mm / 46 mm 32 mm / 47 mm / 46 mm
Weight 1.100 kg 0.022 kg 0.022 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502845 1502846 1502847
Model TRI-FLAT clamp XX = 40 mm TRI-FLAT clamp XX = 45 mm TRI-FLAT clamp XX = 46 mm
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 200 pc. 200 pc. 200 pc.
Dimensions (L / W / H) 32 mm / 49 mm / 46 mm 32 mm / 54 mm / 46 mm 32 mm / 55 mm / 46 mm
Weight 0.022 kg 0.022 kg 0.022 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1999-1-1

Art. No. 1502848 1502849 1502850
Model TRI-FLAT clamp XX = 50 mm TRI-FLAT protective building mat TRI-FLAT protective building mat, foil-clad
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 200 pc. 1 pc. 1 pc.
Dimensions (L / W / H) 32 mm / 59 mm / 46 mm 1200 mm / 120 mm / 3 mm 14000 mm / 120 mm / 6 mm
Weight 0.022 kg 0.295 kg 7.375 kg
Norms DIN EN 1999-1-1 - -

Art. No. 1502851 1502852 1502856
Model TRI-FLAT earthing plate TRI-FLAT bending tool, 2 parts TRI-FLAT carrier module, L = 700 mm
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit - 1 pc. 100 pc.
Dimensions (L / W / H) 11 mm / 11 mm / 1 mm 300 mm / 70 mm / 20 mm 700 mm / 63 mm / 43 mm
Weight 0.001 kg 0.448 kg 0.360 kg
Norms DIN EN 1993-1-1 DIN EN 1993-1-1 DIN EN 1999-1-1

Art. No. 1502857 1502858 1502859
Model TRI-FLAT rear wall panel holder TRI-FLAT cable holder TRI-FLAT self-forming screw
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof Flat roof
Frame thickness Any Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit 100 pc. 100 pc. 100 pc.
Dimensions (L / W / H) 82 mm / 49 mm / 3 mm 30 mm / 150 mm / 23 mm 30 mm / 11 mm / 11 mm
Weight 0.030 kg 0.035 kg 0.006 kg
Norms DIN EN 1999-1-1 DIN EN 1999-1-1 DIN EN 1993-1-1

Art. No. 1502860 1502861
Model TRI-FLAT spacer plate TRI-FLAT rear wall panel reinforcement
Scope of applications Grid-connected Stand-alone Grid-connected Stand-alone
Application Flat roof Flat roof
Frame thickness Any Any
Module brand Module width 790 ‑ 1050 mm Module width 790 ‑ 1050 mm
Packaging unit - 10 pc.
Dimensions (L / W / H) 45 mm / 30 mm / 80 mm 300 mm / 40 mm / 40 mm
Weight 0.008 kg 0.120 kg
Norms DIN EN 1993-1-1 DIN EN 1999-1-1